Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: 350 w/th350


Senior Member

Status: Offline
Posts: 102
Date: Oct 23, 2011
350 w/th350
Permalink Closed


Just pull the engine out of the monte an its up for sale.

350 .030 over

Speed pro pistons compression is 10.25 to 1 with cylinder heads

Eagle SIR rods

Newer stock crank

World s/r torquer cylinder heads 2.02/1.60 valves 76cc

Lunati voodoo cam .504/.525 @.050

Summit roller rockers 1.50

Eddy performer RPM intake

Holley street advenger 670

Summit fuel pump 110gph@7psi

Dyno max headers

Melin high volumne oil pump

Around 3k on engine.It's currently torn down had a lite rattle noise found a bent push rod an one valve spring dampener broken.will new valve seals.this is all the engine needs before reasembling.Ran real good an was able to push the monte down the track on a burned out tranny at a 14.12@99mph

The tranny ihas been rebuilt recently.All the clutches were worn away

B&M torque converter 2000 stall

B&M shift kit

just needs an o-ring for the shifter rod an a new pan gasket was a cork one an i drop the pan to drain int out.Shifts good an firm.Has about 1k on it sence the rebiuld

I might be forgetting some things.these both have run real good for me but i'm going the lsx with a 4speed route.

Asking 2500 for the engine an 750 for the tranny 3000 for both or best offer



__________________

Bad cop no donut
77 monteĀ 
14.12 @99.33mph on a bad tranny with the 350/350

LQ4 in the works

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.



Create your own FREE Forum
Report Abuse
Powered by ActiveBoard