Members Login
Username 
 
Password 
    Remember Me  
Homepage -> NYMCC Message Board -> Restoration & Customization -> stalled at the dyno
Post Info TOPIC: stalled at the dyno
pazzo1969


Senior Member

Status: Offline
Posts: 111
Date: Oct 6, 2009
stalled at the dyno
Permalink Closed

well guys and gals, since getting new parts put on the six, brodix heads, crower shaft rockers, head studs and cometic gaskets, and a little bigger carb. i sent the motor off for another set of runs on the dyno. got a call a few hours ago with some not so good news. motor flat hits the wall at 6800 rpm and will not pull any further. they're main head guy says the intake is done. i had a feeling this would eventually show it's face. so the six is done at 683 peak with a little bump to 16 lbs, the guys tried and said if the intake could breathe i would be in the money with 725 to 750 then it would mean bigger turbo. oh well, it made it this far. mike

__________________
Monte SS, 4.3 V-6 bored & stroked, custom headers feeding a MP T70 turbo, inter-cooled, E.V. hat into blow-thru CSU750 dp. TH350 w/ manual valve body, 3600 stall, Ford 9 w/ 3.50 gears and posi.motor made 767hp @7210 and 649ftlbs @5220 @ 20lbs boost
intimadatorsquizz


Moderator

Status: Offline
Posts: 4020
Date: Oct 7, 2009
Permalink Closed

Mike those are some damn fine numbers for a 6cyl but yes it would've been even better to hit the 725-750 mark.weeeeeee

__________________


I Live my life in such a way that when my feet hit the floor in the morning...Satan shudders & says "Oh shit, he's awake!"

twomanymontes


Moderator - Monte Hunter Lead Investigator

Status: Offline
Posts: 5491
Date: Oct 7, 2009
Permalink Closed

I agree! I wish My SS had that kind of power! Maybe you need to use some of your wicked fabricating skills and make a sheetmetal intake?

__________________

There is no such thing as Too Many Montes
Member of the Motley Cruisers Car Club
pazzo1969


Senior Member

Status: Offline
Posts: 111
Date: Oct 7, 2009
Permalink Closed

my sack ain't that big lol

__________________
Monte SS, 4.3 V-6 bored & stroked, custom headers feeding a MP T70 turbo, inter-cooled, E.V. hat into blow-thru CSU750 dp. TH350 w/ manual valve body, 3600 stall, Ford 9 w/ 3.50 gears and posi.motor made 767hp @7210 and 649ftlbs @5220 @ 20lbs boost
Montess2k


Administrator- Comic Relief

Status: Offline
Posts: 1926
Date: Oct 8, 2009
Permalink Closed

Wow those are some awesome numbers!!! Gotta love V6 Turbo Cars! HA Very awesome indeed...

Joe

__________________
www.facebook.com/montess2kphotography
Rich_S85SS


Moderator

Status: Offline
Posts: 762
Date: Oct 8, 2009
Permalink Closed

Nice power!

__________________

1985 Monte Carlo SS
intimadatorsquizz


Moderator

Status: Offline
Posts: 4020
Date: Oct 8, 2009
Permalink Closed

i guess you didn't get any videos Mike of the dyno runs?

__________________


I Live my life in such a way that when my feet hit the floor in the morning...Satan shudders & says "Oh shit, he's awake!"

redlineSS


Guru

Status: Offline
Posts: 1092
Date: Oct 8, 2009
Permalink Closed

Great Job Mike..............ya gotta be happy!



__________________
~Dave~
Monte Carlo   "Born on the track........Driven on the Street"
pazzo1969


Senior Member

Status: Offline
Posts: 111
Date: Oct 11, 2009
Permalink Closed

thanks guys, not sure if they videoed this time around guys. for these guys vids and proper printers is something they don't seem to care about. i was telling delmonte last time around it looked like they were using toilet paper on a 30 year printer lol. i'll be picking the motor back up this coming weekend if my shop isn't to busy i'll get it this week.

__________________
Monte SS, 4.3 V-6 bored & stroked, custom headers feeding a MP T70 turbo, inter-cooled, E.V. hat into blow-thru CSU750 dp. TH350 w/ manual valve body, 3600 stall, Ford 9 w/ 3.50 gears and posi.motor made 767hp @7210 and 649ftlbs @5220 @ 20lbs boost
John S


Senior Member

Status: Offline
Posts: 224
Date: Oct 11, 2009
Permalink Closed

sheeesh, only 683!! If I were you mike I would trash the motor and build something else.
Better yet, send me the motor and I'll trash it for you, save you the trouble of doing it yourself ;)


__________________
Signature.jpg
Doc


Administrator

Status: Offline
Posts: 914
Date: Oct 12, 2009
Permalink Closed

John S wrote:

sheeesh, only 683!! If I were you mike I would trash the motor and build something else.
Better yet, send me the motor and I'll trash it for you, save you the trouble of doing it yourself ;)


Nah!... send it to me. I have some of that stuff we used in the cash for clunkers program. I'll dispose of it "properly" wink

 



__________________

Jay - 86 Monte LS

We'll be Friends till we're old and senile.... then we'll be New Friends.
pazzo1969


Senior Member

Status: Offline
Posts: 111
Date: Oct 18, 2009
Permalink Closed

well guys, manifold was a wash from SC, they can't get the top, so i went to the land down under and found this little gem. will ship tuesday . yes, that's a magnesium piece, i'm stoked



__________________
Monte SS, 4.3 V-6 bored & stroked, custom headers feeding a MP T70 turbo, inter-cooled, E.V. hat into blow-thru CSU750 dp. TH350 w/ manual valve body, 3600 stall, Ford 9 w/ 3.50 gears and posi.motor made 767hp @7210 and 649ftlbs @5220 @ 20lbs boost
twomanymontes


Moderator - Monte Hunter Lead Investigator

Status: Offline
Posts: 5491
Date: Oct 18, 2009
Permalink Closed

WOW! That is a cool set up! Is it a GM Performance Parts piece?

__________________

There is no such thing as Too Many Montes
Member of the Motley Cruisers Car Club
pazzo1969


Senior Member

Status: Offline
Posts: 111
Date: Oct 18, 2009
Permalink Closed

was made by falcnor racing for gm, guy has some paper work on it that he's sending along was the first design made then gm used it as a mold for the aluminum piece gm was selling

__________________
Monte SS, 4.3 V-6 bored & stroked, custom headers feeding a MP T70 turbo, inter-cooled, E.V. hat into blow-thru CSU750 dp. TH350 w/ manual valve body, 3600 stall, Ford 9 w/ 3.50 gears and posi.motor made 767hp @7210 and 649ftlbs @5220 @ 20lbs boost
intimadatorsquizz


Moderator

Status: Offline
Posts: 4020
Date: Oct 19, 2009
Permalink Closed

sweet Mike can't wait to see the new numbers

__________________


I Live my life in such a way that when my feet hit the floor in the morning...Satan shudders & says "Oh shit, he's awake!"

pazzo1969


Senior Member

Status: Offline
Posts: 111
Date: Nov 21, 2009
Permalink Closed

well guys, got the intake here, been tweeking on it a bit, never enough lol. i just purchased a new set of gm heads that are a little more torque friendly. i have acquired 2 more carbs for dyno use to see what this thing will pull. another barry grant 600 blow thru and an and old modified by me carter 650. i'm going to go ahead and put the DIS setup on there as well to ring every last bit out of this little guy. i also will be taking a tad bigger turbo with me back to the dyno if this one can't keep up . if all goes well i should be able to hit my original mark of 735 to 750 hp and 550 to 575 ft lbs.@ no more than 20psi. that will be be the stopping point for this engine combo. then it will be on to bigger and heavier ideas for the monte. mike

__________________
Monte SS, 4.3 V-6 bored & stroked, custom headers feeding a MP T70 turbo, inter-cooled, E.V. hat into blow-thru CSU750 dp. TH350 w/ manual valve body, 3600 stall, Ford 9 w/ 3.50 gears and posi.motor made 767hp @7210 and 649ftlbs @5220 @ 20lbs boost
twomanymontes


Moderator - Monte Hunter Lead Investigator

Status: Offline
Posts: 5491
Date: Nov 22, 2009
Permalink Closed

Cool! can't wait to hear the next round of results!

__________________

There is no such thing as Too Many Montes
Member of the Motley Cruisers Car Club
intimadatorsquizz


Moderator

Status: Offline
Posts: 4020
Date: Nov 22, 2009
Permalink Closed

sweet mike i can't wait either.good luck on reaching those killer numbers.

__________________


I Live my life in such a way that when my feet hit the floor in the morning...Satan shudders & says "Oh shit, he's awake!"

pazzo1969


Senior Member

Status: Offline
Posts: 111
Date: Jan 3, 2010
Permalink Closed

been working on the intake a bit, had to paint instead of powder coating... to much epoxy in there... ready to finish the move so more hold time . mike


__________________
Monte SS, 4.3 V-6 bored & stroked, custom headers feeding a MP T70 turbo, inter-cooled, E.V. hat into blow-thru CSU750 dp. TH350 w/ manual valve body, 3600 stall, Ford 9 w/ 3.50 gears and posi.motor made 767hp @7210 and 649ftlbs @5220 @ 20lbs boost
twomanymontes


Moderator - Monte Hunter Lead Investigator

Status: Offline
Posts: 5491
Date: Jan 7, 2010
Permalink Closed

Looks good Mike!

__________________

There is no such thing as Too Many Montes
Member of the Motley Cruisers Car Club
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Homepage -> NYMCC Message Board -> Restoration & Customization -> stalled at the dyno


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard